Category Archives: Wireless

Fortinet IPv6 SIT Tunnel Support – Preferring Tunnel Routes Over Router Advertisements

Posted on April 21, 2020 by Charlie Clemmer

The Problem: Background Back at the beginning of the year, before the current Covid-19 pandemic had everyone in the current work-from-home mode, I started scrubbing my home IPv6 connectivity in preparation for finalizing various IPv6 presentations that were planned for … Continue reading →

Posted in Fortinet, IPv6 | Tagged , , , | Leave a comment

IPv6Buzz Podcast Appearance

Posted on March 23, 2020 by Charlie Clemmer

As a byproduct of my February IPv6 presentation at the Wireless LAN Professionals Conference (WLPC) 2020 in Phoenix, AZ, I was asked to take part in a follow-on conversation with the Packet Pushers Podcast Series, IPv6 Buzz. I’ve known of … Continue reading →

Posted in IPv6, Wireless | Tagged , , | Leave a comment

WLPC IPv6 Update Presentation – What IPv6 Means for Wireless Engineers

Posted on March 19, 2020 by Charlie Clemmer

Hard to believe it was four years ago since I first gave an IPv6 for Wireless Engineers presentation to the Wireless LAN Professionals Conference (WLPC) in Dallas, TX. Fortunately, there was interest from the attendees not just in my discussion, … Continue reading →

Posted in IPv6, Wireless | Tagged , , | Leave a comment

Aruba ACMPv8 Certified!

Posted on June 2, 2018 by Charlie Clemmer

May has been a good month for catching up on my Aruba certifications! This exam should have been done at the end of May, but scheduling and customer work resulted in it being pushed off until June 1st. Regardless, I’m … Continue reading →

Posted in Aruba, Wireless | Leave a comment

CWNA Learning – RF Math

Posted on April 16, 2018 by Charlie Clemmer

As mentioned earlier (CWNA Re-certified for 2018), I finally got around to re-certifying the CWNA certification that I originally obtained in 2007. While I consider the CWNA to be the one essential certification for anyone who’s interested in getting into … Continue reading →

Posted in CWNA, Wireless | Leave a comment

CWNA Re-certified for 2018!

Posted on April 12, 2018 by Charlie Clemmer

Just a quick note that I should have posted last week … For the second time since 2007, I’ve completed the certification process for the CWNA! I’ll have more notes posted with my thoughts from the current CWNA, but I’m … Continue reading →

Posted in CWNA | 1 Comment

Fortinet FortiSwitch – Firmware 3.6.5 Released

Posted on February 28, 2018 by Charlie Clemmer

Just a short note, FortiSwitch firmware version 3.6.5 just released yesterday. The release notes for the release can be found on Fortinet’s Doc website. While there are no new features added in this firmware release, there are a few spanning-tree … Continue reading →

Posted in Fortinet | Leave a comment

Fortinet FortiSwitch – Customize Your Switch View

Posted on February 19, 2018 by Charlie Clemmer

Integrated FortiSwitch Mode As a follow-up to my last port on setting QoS profiles for FortiSwitch, I stumbled across a useful way to set profiles to individual ports. WebUI Like most networking products, there are at least two ways to … Continue reading →

Posted in Fortinet | 1 Comment

Fortinet FortiSwitch – QOS Primer

Posted on February 12, 2018 by Charlie Clemmer

Quality of Service – QOS Overview I originally planned to have my first few Fortinet posts be wireless specific, but since getting questioned about migrating QoS configurations from various 3rd party manufacturers into FortiOS syntax … this is a good … Continue reading →

Posted in Fortinet | 1 Comment

Mobility Field Day at Aruba Networks – Skyfii Integration with ArubaOS

Posted on December 18, 2017 by Charlie Clemmer

On September 13, 2016, I presented on behalf of Skyfii how our analytics solution integrated with Aruba’s wireless APIs to leverage data collected from the wireless infrastructure to unlock operational insights for an organization.

Posted in Skyfii | Leave a comment